CBR600 F3 Rear Wheel -- $120

[lanesplitter2]

It's in pretty good condition, a few nicks from tire changes. i bought it for my SV, but my old rear wheel worked fine.

Comes with rotor, sprocket carrier, sprocket and cush drive rubber things.

The wheel is in Mountain View


Local buyer prefered.

[AFstWrx]

is it 5.0 in?

[lanesplitter2]

Of course, this time I measured it from rim to rim it was around 7....

I'll go take pictures tomorrow

[lanesplitter2]

Didn't you already get a CBR wheel -- you've had an SV for almost as long as I have.

[lanesplitter2]

Back in March 2003, there was a guy on some SV board who I wrote asking about the wheel swap. It was Felipe Cabezas, that AFM

[MackeyStingray]

nope, 1 of the few mods i didn't do on my SV. that and the 03 intake cam mod :p only real mods i've done were to the suspension and the obvious race-ready treatment.

haha, mr. 1:39 @ sears on an SV himself? :p

[lanesplitter2]

Here you go, there are chips in the paint all around the wheel, and it looks like it's missing the outter spacers on each side.


I measured it, and it should be the five inch rim.

http://www.bayarearidersforum.com/forums/images/threads/000/103/733/1506303-nicks.jpg

[lanesplitter2]

see..

http://www.bayarearidersforum.com/forums/images/threads/000/103/733/1506307-5-inches.jpg

[stout510]

Are you going back to stock to put the speedo sensor on the back wheel?

[lanesplitter2]

I bought the wheel thinking it would be an important / cool mod for the SV. Never got around to buying the spacer kit from Zoran to put the CBR wheel on it. The 4.5" GSXR wheel has worked pretty well since I got the bike.

The 5" wheel is for people who wanna go with bigger tires. With the 4.5" you can still try up to 170's. For me, the CBR wheel boils down to having a cool looking 5-spoke wheel.

Damn I suck at selling stuff.

[TWF]

Originally posted by lanesplitter2

Damn I suck at selling stuff. [/B]

you suck at measuring :laughing
there is size casted inside one of spokes.;)

[Ducky_Fresh]

I have a 4.5" wheel still if anyoen wants it........ would be perfect for a motard though. :/

-ev

[lanesplitter2]

I searched the wheel for a part number, but didn't see anything. I'll have a flashlight with me tomorrow.

[TWF]

spokes are U shaped,look inside of them.one will have size in it.it will say 17x5.0 or 17x4.5

[Ducky_Fresh]

It will actually be stamped inside. 5.0"

Dammit Zoran beat me to it.

[lanesplitter2]

I just checked.

takers?

[Ducky_Fresh]

Check PM's

- everett

[lanesplitter2]

thanks ducky