DID Chain Deals

[CalSportbike]

Hey All,

First, thanks to SteveCo for allowing us to start offering special deals to BARF members.

First deal heading your way (we'll run it through end of November) is DID chains.

DID Premium VM X-Ring
(gold side plates)
520x120: Retail $118, Special $81
525x120: Retail $125, Special $87
530x120: Retail $140, Special $98

DID ERV2 (Exclusive Racing Series)
Gold-plated side plates
520ERV2: Retail $163, Special $110

Prices do not include tax (for CA residents) and UPS Ground shipping.

When replacing your chain, we suggest you go with the SS Series high performance hard-anodized and cross drilled sprockets from Sprocket Specialists. And our everyday price on sprockets is below retail.

To get this discount, order online at:
calsportbike.com (http://www.calsportbike.com)

In the "comments" section make sure to mention "BARF DISCOUNT" to get the special pricing.

If you need help with gearing suggestions or don't know what's right for your bike and need to talk with us live before you order, call us at 760-249-8890 on our customer service line.

[magyarbetyar]

Dumb question?? What size chain is on a 929? I'm not good w/ chain measurments. :(

[SeanT]

Ack, you're like 3 weeks too late. Alreay bought a 525XVM.
love it, btw. apparently paid too much though:(

Sean

[CalSportbike]

Originally posted by magyarbetyar
Dumb question?? What size chain is on a 929? I'm not good w/ chain measurments. :(

Stock is 530x108 with 16/43 gearing.

[pelikan]

damn, a few weeks to late for my yzf600r, but my 94 dr350 needs new sprokets/chain, maybe ill give a call tommorrow.

[magyarbetyar]

Originally posted by CalSportbike
Stock is 530x108 with 16/43 gearing.

Does the DID ERV2 (Exclusive Racing Series) Gold-plated side plates come in that size?

[CalSportbike]

Originally posted by magyarbetyar
Does the DID ERV2 (Exclusive Racing Series) Gold-plated side plates come in that size?

The 530ERV is a 120 length, and you would cut it down. We sell the mini breaker and mini press as a set for $50...but you would need to peen the rivet end. Oh, and you want to gring the rivet before using the breaker so you don't start breaking pins (they don't hold up well to sideslip torque).

[magyarbetyar]

:cool Thanks Todd

[Melissa]

Todd,
your timing works for me!!!
As soon as I get my next paycheck, I will be ordering
A DID, ERV, X ring with rivet type master link from
you guys and will also look at the prices you offer on front and rear sprockets.

BTW, how long will this discount last???

Melissa

[mcwong153]

Originally posted by CalSportbike
Hey All,

First, thanks to SteveCo for allowing us to start offering special deals to BARF members.

First deal heading your way (we'll run it through end of November) is DID chains.

Melissa I think you have plenty of time.

[Melissa]

Yep, til end of November
leaves me plenty of time!
I really only read 1/2 of the posts and never get to the more impt. details.
Details, details.....
Melissa

thanks

[staRang]

What would a stock GSXR600 and F4i use?? Both 01'....

Thanks in advance...

[staRang]

What's up w/ a group buy on some M1's?

Purdy puhleeeeeeeease!!!!!

[Duc996rGirl]

Looking for a DID chain for a Ducati 996. Can yuo please help me out with sizing? Feel free to PM me. Thanks!

Ann

[CalSportbike]

Originally posted by staRang
What would a stock GSXR600 and F4i use?? Both 01'....

Thanks in advance...

Sorry for the delayed reply....

The F4i is a 525x108 with 16/46 gearing.

The GSXR600 is also a 525x110 with 16/45 gearing.

If you're happy with your current gearing and your sprockets aren't worn, then just get the chain. If your sprockets are showing signs of wear, or you want more holeshot, now is a good time to replace both.

[ixracex4xpho]

just ordered a DID x-ring chain for my r1. Decided to keep the stock 530X120 16/43 sprocket setup. can't wait til it gets here...

[krazychowmein]

check your PM's please

[AzNRaveN9]

what size does an '87 CBR F/Hurricane use??
thanks in advance..

[CalSportbike]

Originally posted by AzNRaveN9
what size does an '87 CBR F/Hurricane use??
thanks in advance..

No worries...we always discount chains for BARF members. $91 for the 520VM, $96 for the 525VM, and $99 for the 530VM. They retail at $118-140.

The old CBR600's used a 530 chain. They didn't switch to a 525 until the F2. There is NO REASON why you shouldn't go to a 520 chain these days, with the quality and high tensile strength of the newer chains, and DID is the right way to go. Granted that requires new sprockets, but I don't think you'll be disappointed with the results, and you're reducing quite a bit of rotating sem-sprung weight. You'll save 2lbs going from a 530 to 520 chain, and save a bit also on lighter sprockets.

[Arnold_R1]

All I got to say is Todd is the sh*t! I dealt with Todd before and when he promises a date, he'll really come through and make sure your part arrives on time. Excellent customer service! Keep up the good work Todd!

http://www.bayarearidersforum.com/forums/images/threads/000/010/943/742534-party.gif

[shin00bi]

would the 1997 gsxr 600 also be a 525x110 with 16/45 gearing

[MackeyStingray]

todd, you wouldn't be able to sell the DID chain install/remove kit would you?

similar to what motion pro sells:
http://motionpro.com/images/chaintool_w_box.gif

for what motion pro charges, it's pretty crappy. pot metal suxors

[Max Smiley]

I'd like a chain break/rivet kit as well. didn't know that about the MP tool mackey, thanks for the headsup.

[MackeyStingray]

even after grinding down the peened rivets and putting the breaker pin in straight, it still breaks. also the riveter backing plate cracked in half installing a chain.

[evolution247]

Originally posted by staRang
What's up w/ a group buy on some M1's?

Purdy puhleeeeeeeease!!!!!

Group buy! I'd be down for something like that!:teeth

[Rambeezi]

I heard the MP tool was a piece of crap myself. What are the other options as far as manufacturer? I think all I've ever seen are Motion Pro...

[MackeyStingray]

i saw a pic of the metal box (already a plus) for a DID chain tool on ebay once. i think it sold for maybe $150 for the tool. then again, it's ebay. so i know DID makes 1. but are we able to get it?

[BlaziN R1]

damn...those are some good prices...too bad i already bought one a little while ago. are all the 530 did xring chains gold plated?

[JnglstTICAL]

Todd, sorry to give you another question, but do you also apply this discount to o-ring chains?

[Max Smiley]

I think KowaTools makes a chain tool kit too :confused
same folks that make the Handy Stands and other fine products :p

[jcmjrt]

OK, I'm gonna' admit total ignorance. I just purchased a VFR400R NC24. This is my second motorcycle but the first one with a chain. I'm hoping that since you are selling chains that you have some expertise. How many miles given normal (not totally ignored and not anal) care should a chain last? I'm sure that this varies but a ballpark is good. How should I check it? My plans at this point are short local rides in the twisties. No track time. No cross country jaunts. What kind of chain should I have? Are the chains that you are advertising primarily for normal use or for racing? Recommendations? I just bought the bike and need to go to the store to buy lube. I kind of figured clean with WD40 and a rag and then lube with..?? Any good recommendations for lube? Thanks for your help.

[ixracex4xpho]

chain wax. it's a spray on, and makes ur chain feel like a candle. Doesn't fling either, once it's set.

On another note, Todd is an awesome person to deal with. takes care of his costumers and keeps very good communication. can't wait til my parts get here.

[EastBayDave]

I need a 530 for a 99' ZRX1100...

That's the $99 DID chain....correct?

[TrackTime]

SHIN - It's 525x108 and 16/45 for that year.

MACKEY - Yes, we sell the "MP Riveting Kit" on our site. It's very popular.

EVOLUTION 247 - There's not really a big margin on tires, but I'm willing to put something together. Email me to arrange a group price.

ALL - BARF is the only place I've heard any negative feedback about MP tools. We've sold hundreds of their mini breakers and mini presses and several dozen of the full riveting kits with zero negative feedback. Possible that a couple of you just are unlucky?

BLAZIN R1 - No. The VM chains just have gold side plates. Only the ERV2 race chains are gold plated for lower friction.

JNGLSTTICAL - Yes, I'd hook you up a deal on the Pro-V O-Ring chains as well.

JCMJRT - A good X-ring chain will get many folks 15,000 miles or better. It ALL depends on how well you maintain it. There are dozens of good threads on BARF that will help you with chain maintenance. An O-Ring chain is a good thing compared to a non-sealed chain. An X-Ring chain is a step up with a longer wear rating. A common race chain is the DID 520ERV2. I like the Maxima chain wax...but every has their own opinions.

IXRACEX4XPHO: Thanks for the compliment. I concur. Chain was is a good choice. Something to remind folks is to HEAT UP the chain first since you want to apply the wax to a warm chain, then as the chain cools the wax "sets" and will protect better. Good call!

EAST BAY DAVE: Correct. $99 for the 530VM. It comes with a rivet link standard.

MODERATOR: Any chance y'all can stick this thread since I'm willing to do a long term special for BARFers?

Just to reiterate pricing for my BARFers;

DID Pro-V O-Ring
(gold side plates)
520x120: Retail $82, Special $59
525x120: Retail $130 (ouch!), Special $89
530x120: Retail $110, Special $76
NOTE: We can special order 108, 110, and other OEM lengths in the Pro-V chains in 520x.

DID Premium VM X-Ring
(gold side plates)
520x120: Retail $118, Special $91
525x120: Retail $125, Special $96
530x120: Retail $140, Special $99

DID ERV2 (Exclusive Racing Series)
Gold-plated side plates
520ERV2: Retail $163, Special $114

Enter BARF DISCOUNT when checking out (in the COMMENTS box) to get the special pricing.

Best Regards,

Todd Robinson, Sales Manager
_________________________________
Cal-Sportbike (on The Crest in Wrightwood, CA)
Parts * Accessories * Apparel * Gear
ONLINE STORE: http://www.calsportbike.com
sales@calsportbike.com
Shop/Orders: 760.249.8890
Fax: 760.249.9917

[CalSportbike]

Originally posted by jcmjrt
OK, I'm gonna' admit total ignorance. I just purchased a VFR400R NC24.

Hey jcmjrt!

It was great talking with you on the phone today. I asked AFAM about sprockets for your bike and we had no luck. Can you confirm if your bike has the single sided swingarm?

Anyhow, they suggested that you grab stuff from Japan since the NC30/35 seem to be what people over here MAY have available, but not apparently for the NC24.

[Mfed]

Any way to get the 530VM discounted without the gold plates? :teeth

[TrackTime]

Originally posted by Mfed
Any way to get the 530VM discounted without the gold plates? :teeth

The VM series only comes with gold colored side plates.

[Mfed]

Welp, for that price who's complaining? Order coming your way. Thanks for the killer deal! :cool

[zx7biker]

I am ordering a
DID Pro-V O-Ring
(gold side plates)
520x120: Retail $82, Special $59

Now any place that will cut it to 110 for me and install since I'm not buying a chain kit?? ( anyone chime in )

TRACKTIME or CalSportbike; How much for the special order cut to a 110 link chain.

My bike is a Kawasaki 96' ZX7R.

Please advise.

ZX..........

[CalSportbike]

Originally posted by zx7biker
I am ordering a
DID Pro-V O-Ring
(gold side plates)
520x120: Retail $82, Special $59

Now any place that will cut it to 110 for me and install since I'm not buying a chain kit?? ( anyone chime in )

TRACKTIME or CalSportbike; How much for the special order cut to a 110 link chain.

My bike is a Kawasaki 96' ZX7R.

Please advise.

ZX..........

For the 520x110 Pro-V, your cost is $54. You can order this at http://www.calsportbike.com/order/

Sorry if my using two different screen names got confusing on this thread....I normally use TrackTime to deal with track days and CalSportbike for my shop, but with the cookie issue I sometimes have problems keeping my crap straight. :)

[zx7biker]

Originally posted by CalSportbike
For the 520x110 Pro-V, your cost is $54. You can order this at http://www.calsportbike.com/order/

Sorry if my using two different screen names got confusing on this thread....I normally use TrackTime to deal with track days and CalSportbike for my shop, but with the cookie issue I sometimes have problems keeping my crap straight. :)

Understand, crap can get pretty messy at times:laughing :laughing

Using the Misc. Product orders page, do I just discribe the part as you quoted and then order? If so, GREAT!!!

BTW......... 54 bucks:wow ??? YOUR Freaking awsome!!!!!!!! It will be a Done deal tomorrow!!!!!!!! Best "deal" I got was $79.00 on same chain.

ZX.....

[Mfed]

Ok, one more question - do you carry (or can you get) the 530ZVM? If so, how much?

Thanks again :cool

[250mL]

I have a 2000 Ninja 250.

Stock gearing is 14/45. I'd like to put 15/42-44. (I commute with the bike and need the lower revs)

The stock chain is a 520, but I don't know what length chain to put on with the change in sprocket sizes.

I'd like to get all three (2 sprockets and 1 chain) from you.

Can you advise me on what to get?
Will you be able to honor the price if I order on Monday or Tuesday?

Thanks,
Russ

[CalSportbike]

Originally posted by zx7biker
Understand, crap can get pretty messy at times:laughing :laughing

Using the Misc. Product orders page, do I just discribe the part as you quoted and then order? If so, GREAT!!!

BTW......... 54 bucks:wow ??? YOUR Freaking awsome!!!!!!!! It will be a Done deal tomorrow!!!!!!!! Best "deal" I got was $79.00 on same chain.

ZX.....

Sorry....for some reason the board didn't email me when you posted. Yes, use the misc form, with the quoted price. :)

Sorry for the delay in responding.

[CalSportbike]

Originally posted by Mfed
Ok, one more question - do you carry (or can you get) the 530ZVM? If so, how much?

Thanks again :cool

The 530ZVM retails at $182 for the 120 link or $197 for the 130 link size (ya gotta extended swingarm 'Busa?).

Our price would be $129 and $140 respectively. Use the Misc order form. :)

[CalSportbike]

Originally posted by 250mL
I have a 2000 Ninja 250.
Stock gearing is 14/45. I'd like to put 15/42-44. (I comute with the bike and need the lower revs)
The stock chain is a 520, but I don't know what length chain to put on with the change in sprocket sizes.
I'd like to get all three (2 sprockets and 1 chain) from you.
Can you advise me on what to get?
Will you be able to honor the price if I order on Monday or Tuesday?
Thanks,
Russ

Hi Russ,

You would want a 520x106 chain if you stay with the stock length. So if you get a VM X-ring chain you cut down a 120x. If you get a Pro-V O-ring chain I can do a 106x for you. Retail on the 106x is $73 and your price is $52.
I'd suggest AFAM sprockets....they'll last a long time. Front is $14.99, rear(hard anodized) is $57.99. I can do a Sprocket Specialists alloy rear (non-anodized) for $33.99.

The special was originally posted in November of 2002. I extended this to a long term deal for BARF members, so it is still good on a (somewhat) permanent basis, unless I need to adjust pricing a little here and there. :)

[250mL]

Awesome! I guess it would help to pay attention to what I read next time. :)

I'll be placing an order soon.

Thanks,
Russ

[CalSportbike]

No worries. :)

I frequently need to stop and intake more caffeine before trying to make sense myself!!

[zx7biker]

Thanks for the hook up!!!!!!! Submitted order tonight. Wish your shop was closer, I'de swing by and say thanks!!

ZX.........

[CalSportbike]

Well I'm ONLY 5 hours away if you're hustling :)

[Mfed]

Originally posted by CalSportbike
The 530ZVM retails at $182 for the 120 link or $197 for the 130 link size (ya gotta extended swingarm 'Busa?).

Our price would be $129 and $140 respectively. Use the Misc order form. :) Will do, thanks. :Port

[eklew]

Just got my stuff from Todd, he is an easy guy to deal with and my stuff got to me in a reasonable time. Thanks Todd for the info over the phone as well.

[CalSportbike]

Elden,

You are quite welcome. It was a pleasure to speak with you too. I'm always happy when I can help. :)