edehaven
12-06-2006, 01:52 PM
Fully preped ready to race.. $1100
I have a fully race prepped Modified YSR for sale here (I ran it withyou guys at stockton in supermod last year when we came up and came in 3rd). Ready to race put gas in and go. The motor was built by Harry Okuda and is one potent mini.. To those who knew Harry and his work his motors are very special and you wont find many like his motors again
Ok so here is the breakdown.
---YSR50 chassis
BRAND NEW just installed Calamari tapered steering head bearing
Calamari dual spring fork upgrades with fork brace and front wheel bushings and bearings replaced begining of last year.
Aftermarket (minimoto madness) reinforced Aluminum Top tripple
Aftermarket clipons
BRAND NEW Calamari 1/4 turn Quickturn throttle
Daytona Analog Tach
Stock Front fairing upper and lower with Fiberglass tail.
Dunlop TT91's with plenty of life left, (they were new early this season)
Shaved and raised foot pegs
Rearstand included
Steel Braided Brake lines and RACE pads
Harry Okuda built SuperMod race engine..
So this is the real nice part of this bike. I had Harry Okuda build this motor at the begining of last year including all his famous head and port work, and has since seen a full rebuild (seals, bearings, piston, rings, etc..) at the begining of this season. And I just rebuilt it again a few weeks back!!!! All new seals, piston, rings, etc..!!!
Wiesco piston over bored to 43.5mm
Harry Okuda very radicaly ported and polished head and cylinder
Boyseen Fiberglass reeds with 20mm Mikuni round slide (VM20) and K/N filter
Race 5speed Close ratio race trans
Removed kickstart and oil pump.
Stock ignition with the lighter flywheel.
DG pipe
The bike is fully preped, safety wired and has all the little trick extras to make the YSR's race ready. The motor makes great power and has a nice large powerband
I would prefer local pickup, But I can help out a little as I am in Los Angeles. This was my oldest sons bike last year and now he is moving up to 125GP and we need the space and money for next seasons bikes, so help a great kid racer out and buy this bike :^)
I also have some pocket bikes for sale as well so if your interested in those please email
please feel free to ask any questions.. and I will post some more pictures up later today.
ericdehaven@hotmail.com
http://www.bayarearidersforum.com/forums/images/threads/000/186/880/2863188-ysr1.jpg
I have a fully race prepped Modified YSR for sale here (I ran it withyou guys at stockton in supermod last year when we came up and came in 3rd). Ready to race put gas in and go. The motor was built by Harry Okuda and is one potent mini.. To those who knew Harry and his work his motors are very special and you wont find many like his motors again
Ok so here is the breakdown.
---YSR50 chassis
BRAND NEW just installed Calamari tapered steering head bearing
Calamari dual spring fork upgrades with fork brace and front wheel bushings and bearings replaced begining of last year.
Aftermarket (minimoto madness) reinforced Aluminum Top tripple
Aftermarket clipons
BRAND NEW Calamari 1/4 turn Quickturn throttle
Daytona Analog Tach
Stock Front fairing upper and lower with Fiberglass tail.
Dunlop TT91's with plenty of life left, (they were new early this season)
Shaved and raised foot pegs
Rearstand included
Steel Braided Brake lines and RACE pads
Harry Okuda built SuperMod race engine..
So this is the real nice part of this bike. I had Harry Okuda build this motor at the begining of last year including all his famous head and port work, and has since seen a full rebuild (seals, bearings, piston, rings, etc..) at the begining of this season. And I just rebuilt it again a few weeks back!!!! All new seals, piston, rings, etc..!!!
Wiesco piston over bored to 43.5mm
Harry Okuda very radicaly ported and polished head and cylinder
Boyseen Fiberglass reeds with 20mm Mikuni round slide (VM20) and K/N filter
Race 5speed Close ratio race trans
Removed kickstart and oil pump.
Stock ignition with the lighter flywheel.
DG pipe
The bike is fully preped, safety wired and has all the little trick extras to make the YSR's race ready. The motor makes great power and has a nice large powerband
I would prefer local pickup, But I can help out a little as I am in Los Angeles. This was my oldest sons bike last year and now he is moving up to 125GP and we need the space and money for next seasons bikes, so help a great kid racer out and buy this bike :^)
I also have some pocket bikes for sale as well so if your interested in those please email
please feel free to ask any questions.. and I will post some more pictures up later today.
ericdehaven@hotmail.com
http://www.bayarearidersforum.com/forums/images/threads/000/186/880/2863188-ysr1.jpg