FS: 2008 Yamaha R6 Supersport/AFM Legal w/ 450 Conversion

[Smitty769]

Asking $6500 OBO - Located near Sacramento, CA

**Currently a 600**

****I have many additional pictures, can answer questions, and will entertain all reasonable offers, so please feel free to message me!****

I decided to see if anyone is interested in a good 600 or 450 racebike. I have raced it as both and it is capable at either. I just don't ride enough anymore (such is life right now) - Currently setup as a 600

Taken meticulous care of. Oil + filter changed after every race weekend and every other track day. Inspected and cleaned constantly

Here is a list of what is on the bike:

• Vortex V3 Keyless Gas Cap
• Shorai Lithium Battery
• SBS Dual Carbon Front Brake Pads
• CRG folding levers
• Spiegler Rennsport Braided brake lines front and rear
• GPR stabilizer
• Stompgrip Tank Grip Pads

• Woodcraft Throughout
Frame Sliders
Rear spools + Sliders
Bars (Renthal Fork Clamps)
Keyless start bypass
Engine case covers w/ sliders
Full rearsets w/ folding tips
Swingarm Sharkfin
Rear brake master cylinder tension spring
Front fairing mounts

• Wilbers fully adjustable Rear Shock
3 way piggyback (Hi/Low/Reb) – Sprung for rider 230# in gear

• Ohlins FGK127 25mm Fork Cartridges w/ 1.0 springs installed w/ Ohlins Fork Cap Extenders

• 2015 motor supersport build by Meen Motors (built for pump gas, and only run with pump gas) – moderate hours but still very strong – hardly ran in 2019 big reason why I am parting with it
2 AFM weekends as a 600 + 3 track days (2017)
2 AFM weekends as a 450 + 3 track days (2018)
2 track days as a 600 (2019)
Graves Carbon Exhaust
Complete Samco Silicone Coolant hose Kit (red)
Cox Radiator Guard
GBRacing Clutch Cover

• Full Bazzaz System
Z-Fi TC (Traction Control) fuel controller
QS4 Push/Pull sensor Quick Shifter (currently GP shift)
Z-AFM Self Mapping Module
TC Activation Light
TC Adjust / Map

• Driven Sprocket + aluminum sprocket nuts
• EK 3D 520GP chain
• 450 conversion available
Correct Sprocket + chain (DID ERV3 gold)
Bypass module + dummy injector

• Many spares available/included (brake pads, bars, pegs, levers, etc.)

• Front and rear Pit Bull stands available/included (front stand = dual lift, can be a fork lift or triple clamp lift)

• Warmers available/included (Woodcraft Gen III dual temp)

• Many oil filters (OEM) + oil (Motorex Synthetic) available/included

[UMZenki]

PM’d. Interested if still available.

[UMZenki]

Still interested in this bike if available. If someone can get in touch with Stephen to let him know, I’m not sure he checks this thread or pm’s