Surprisingly yes, I tried on the bottom but visibility was crap. Up there is much better. Granted, the under bar looks a bit better to me. But with only 1 mirror, I wanted to maximize how much I could see. Instead of looking over your shoulder like the oem, you look through the gap between your torso and armcan you see out of that mirror? most guys who run them that close to the bar run them on the bottom
Zeta handguards, crg mirror, r&g spools, baja designs xl 80 headlight via motominded, backyard designs graphics kit
The arrow pipe and fueling dongle the previous owner put on make the bike rip and sound great!
May down the line get a Rottweiler intake solely to have the storage bag..obviously would do sas / Evap removal and pcv if I do that...bike doesn't need it though
I gave myself a personal goal to ride in October..I rode the last day in September...granted..it was around the block...but I was back on 2 wheels!!!!!
Good stuff man!
Glad to hear you're riding.
I remember my first ride back from my crash on a 690 SMC, one that put me in the hospital with 4 broken ribs, broken thumb, etc. I put the bike back together in the garage and hobbled it down the street and back and got a ticket. lol I guess the world was telling me I wasn't ready.
thanks man!
jeez! yea, sometimes the world drops hints on us.
went out to ride the other day and it started raining...i took the hint and went home.
i have officially ridden! went out for a 75 mile loop yesterday. had to pull over after 30 miles and just stretch the knee out..only took maybe 45 seconds.
watch out by calero! the road is all dug up. regardless. the bike is AWESOME! i love it!!
didn't have to wait until june for that 1 wheel action! comes right up in 1st and 2nd! the riding style suits me. i have always liked bikes with handlebars and this one is no different! it seriously lacks the power of and s1000, but i knew that buying it. the only time i had a power issue is when i was stuck behind a car and i would normally barley blip the throttle on s1k, this bike i did not feel confident enough to pass in a spot i Always would ( very long straight with great lines of sight)
bottom line. i am very happy with this bike and will enjoy smoking some supersports in the twistys when i get back to that aggressive of riding.
![]()
Changed some more stuff. Added intake, PCV map for all mods, and graphics kit.
Bike is running really well. Very snappy throttle response, good power - roll on throttle in 2nd will hoist the front, and still 120+ miles to the tank. Rode to SF and back and thought I was on a twin on the highway.
So now that you got the intake and pc5 (even tho i said it wasn't worth it) what are your thoughts on them?
I tried a bunch of different maps and settled for the DJ 003 map on their website for open intake and slip on - I was not impressed at all by the rottweiler maps. The bike felt choked up, it just didn't feel much difference from stock.
Overall, I think the PCV made a huge difference in the way the bike rides. More power from off idle to mid throttle. The throttle is much more responsive now, which is really what I cared for the most.
Overall, the bike rides exactly like I want it too, spins up quick, snappy and no flat spots.
I remember what you said, and I also felt the same way with some of the maps I tried.
The power delivery felt so nice that I never bothered to put on my 15t front sprocket.
My mileage stayed the same, about 120 before the light came on and I rolled into the gas station at 130 with a quarter gallon to spare.
i'm peeling off that graphics kit now
So maybe just a PCV alone is the way to go? Skip the Rottweiler intake...
Id skip both at this point. I'll get back to you on the other map. Doubt ill be blown away but hey you never know. Slip on and fuel dongle is what id recommend at this moment in time. Should have a few miles and new map this weekend and will post results.
I dont think the fuel dongle did anything other than giving me a piece of mind.
Remember, the dongle only affects the closed loop map, which is maintenance throttle. Doesn't add more fuel. Just allows the bike to stay in the 'richer' closed loop map at small throttle openings. Wack the throttle, and the open loop map takes over--and this is what the PCV fuel tables and ignition timing does the most gains.
Now remember, every bike is different, so a OTS map may work for me, may not work for you. Best is to get dyno tuned so you can see real AFR numbers.
I noticed when I compared the rottweiler map to the DJ 003 one, that rottweiler leans out certain throttle openings vs adding more fuel in the DJ map. Maybe my bike just didn't like it . Not sure.


I hate you Stan
![]()
Anyways, i got off early today and loaded the map and went on a 20 min ride. The rottweiler map is so much better on my bike. The pc map felt a lot lazier. I glanced over both maps like you and noticed the same thing, the pc map is richer than the rott one. I wonder how much our 2 different environments (you in relatively dry CA and me in relatively not TX) have to do with that.
Anyways, i'm glad you think the intake/pc5 was worth the expense. I still don't. Guess i'm just glass half empty
BUTTTTT, in other news, i did get a chance to use the helmet mount set up i put together for my gopro the first time so guess it wasn't a complete waste of time
[YOUTUBE]raqQcOmvAZI[/YOUTUBE]
haha, sorry man. I guess different bike/conditions, etc matter!
Nice wheelie brother, doesn't seem like your bike is lacking any power![]()

Do you have straight gas there, vs E10 here maybe?
All good homie
Know what, if i didn't think the bike was already over priced I guess it'd have been a bit of an easier pill to swallow. Another $700 on top of what's already a few grand more than it should be was just kinda yuck. I've got over 3000 miles on it now and most of that is on the rott map. Trying the pc5 map felt noticeably down on power. My thinking is the factory map is already leaner than both the maps we're using but my bike/environment doesn't like as much fuel which is why it didn't feel like it picked up on as much power since it went from lean to a bit richer. Your bike/environment needs the fuel and you went from lean to a lot richer so your bike picked up more. Just speaking out loud here
Anyways, i still think you should give the -1 a try. Probably the easiest mod to install out of all the ones you've done so far.
111mph with the -1 and 130 with the 0...or so i've heard![]()
I just spent a little more time than i initially did and compared maps side by side and the 2 maps are almost identical with ignition advance exactly the same @ everything above 4250 rpm. rott seems a c*nt hair richer
which rott map do you have stan?
I'm saying the pc5 03 map has the same timing as the rott one (also ignition advance).
Anyways I'm done worrying about it, putting it on a dyno and tuning it there is really the only way to know if the intake and pc5 are worth it.
Just gonna ride it and be happy
9999? You should be arrested