-
There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.
What have you made lately?
- Thread starter Dubbington
- Start date
mean dad
verum super omnia
Dubbington
Slamdunk Champion
a couple of acrylic portrait sketches using a palette knife and no brush. Just fucking around, no real theme or reason behind them other than the fun of painting
Kevin those are really nice!
I like series of artwork and I think all 3 together look good. What size again?Kevin those are really nice!
Over the past two months or so I did like 20 portraits. Those are just a couple.
Top one is 30x20" and the other two are 16x20"
Those knives are beautiful.
I'm sandbagging here, but this kinda falls under the "what I built lately:"
nice
asthmodeus
New member
nice work. she reminds me of audrey hepburn.arrite i'll start the bidding at 50$ for the top one unless they already been boughten....what's the substrate btw?
Last edited:
asthmodeus
New member
:crickets
arrite i'll start the bidding at 50$ for the top one unless they already been boughten....what's the substrate btw?
didnt see this.
but the top one is already spoken for. adam called dibbs
asthmodeus
New member
Well if he bails on it lemme know
Karbon
Hyper hoñorary
2x72 belt grinder.
My 1st attempt at building industrial equipment. Fortunately no fingers were harmed and no one died.
Looks like ass, but it's beastly, and will turn bars of whatever into powder, all the while giving me maximum control. Its also pretty damn quiet. I'll eventually build a dedicated table with rubber dampers at the mounting points for even more quiet operation.
Half of it is scrap steel, 4" x 4" x 1/4" square tube and 1/4" - 1 1/2" cold roll
Powered by 1 1/2 hp motor on 220v. With maska 2-3-4 drive pulleys, giving me set speeds of appx 240-1100 sfpm . The entire unit is heavy.
All the welding was TIG by my buddy Ed.
Tension spring is a old fork spring from the Superhawk.
wheels are bought though diygrinder.com
Knowing what I know now, I would have built it a bit differently, but so far it does the job in scores.
My 1st attempt at building industrial equipment. Fortunately no fingers were harmed and no one died.
Looks like ass, but it's beastly, and will turn bars of whatever into powder, all the while giving me maximum control. Its also pretty damn quiet. I'll eventually build a dedicated table with rubber dampers at the mounting points for even more quiet operation.
Half of it is scrap steel, 4" x 4" x 1/4" square tube and 1/4" - 1 1/2" cold roll
Powered by 1 1/2 hp motor on 220v. With maska 2-3-4 drive pulleys, giving me set speeds of appx 240-1100 sfpm . The entire unit is heavy.
All the welding was TIG by my buddy Ed.
Tension spring is a old fork spring from the Superhawk.
wheels are bought though diygrinder.com
Knowing what I know now, I would have built it a bit differently, but so far it does the job in scores.
Attachments
TylerW
Well-known member
I made a Timelapse panning controller for small cameras. I made a video about it too:
[youtube]cS93hhrdY6U[/youtube]
I've got another project I'm working on now making led panel lights for video lighting. I'll post up that video when its done.
[youtube]cS93hhrdY6U[/youtube]
I've got another project I'm working on now making led panel lights for video lighting. I'll post up that video when its done.
fromeast2west
New member
Telecaster
I made this out of salvaged old growth redwood:
Which I built up to make this:
I made this out of salvaged old growth redwood:
Which I built up to make this:
Karbon
Hyper hoñorary
You guys rock. A lot of makers on the BARFs.
MotoWhip101
New member
- Joined
- Jun 23, 2008
- Location
- Carmel CA
- Moto(s)
- 2008 YZF R6 2007 YZF R6 2003 TTR125L(2) 89 Razz scooter
- Name
- Todd
- BARF perks
- AMA #: 913917
carries an axe
meat bone meat meat meat
proper as fuckI made this out of salvaged old growth redwood:
Which I built up to make this:
littlebeast
i feel… motivated
- Joined
- Jan 26, 2008
- Location
- CA historical landmark #399
- Moto(s)
- the red witch + the green goblin
- Name
- hey you
i made eggs benedict yesterday. first time ever. it was fucking awesome. no wheelies involved lol.
JackTheTripper
Shotline For Mod
Geiger counter. From a kit from makershed but next step is to install it into an old Geiger counter from the 50's my wife bought me so it works again. From the outside it will look original.
tzrider
Write Only User
I made this out of salvaged old growth redwood:
Which I built up to make this:
You're the only other guy I know it have redwood guitar. You made a cool one. I made a weird one:
asthmodeus
New member
You're the only other guy I know it have redwood guitar. You made a cool one. I made a weird one:
Owsley Stanley would be proud if that...i think.
Dubbington
Slamdunk Champion
Sweet stuff! Putting the finishing touches to a 72" window cornice box for my sister the. Start on my niece and nephews craft table. Pics to come.
horsepower
WaterRider/Landsurfer
- Joined
- Nov 26, 2006
- Location
- The wild west side of Davis
- Moto(s)
- 2007Honda CBR 600rr
2010 KTM 690
2014 Grom
- Name
- Daniela
I'm making a "Happy Birthday Dubbington" with my mouth. 
arty
Will post up what I just made later, but it really doesnt compare to the awesome stuff posted here already. I sign my work, "made by the queen of close enough".
artyWill post up what I just made later, but it really doesnt compare to the awesome stuff posted here already. I sign my work, "made by the queen of close enough".
