BMW 1200GSA Tools list?

[vivekgr92]

Hi All,

I am excited to do DIY maintenance on my BMW 1200 GSA. I spent a lot of hours finding the correct tools. ChatGPT was useless. Here is my list. Let me know if you have any suggestions

• RIMKOLO 13-Piece Torx Bit Socket Set, 1/4”, 3/8” and 1/2” Drive T8-T60 Star Socket Set, S2 Steel Bits and CR-V Sockets with Storage CaseRIMKOLO 13-Piece Torx Bit Socket Set, 1/4”, 3/8” and 1/2” Drive T8-T60 Star Socket Set, S2 Steel Bits and CR-V Sockets with Storage Case
  
  ​

  
  

  CASOMAN 3/8" Drive Impact Socket Set, 49 Piece Standard SAE and Metric Sizes (5/16-Inch to 3/4-Inch and 8-22 mm), 6 Point, Cr-V Steel Socket Set
  ​

  
  

  EPAuto 3/8-Inch Drive Click Torque Wrench 10-80 ft-lb. / 13.6-108.5 Nm 1.5" Wx1 Dx14.5 HEPAuto 3/8-Inch Drive Click Torque Wrench 10-80 ft-lb. / 13.6-108.5 Nm 1.5" Wx1 Dx14.5 H
  
  https://www.amazon.com/gp/product/B075ZVQVSY/ref=ox_sc_act_title_3?smid=A1L7F5DL4H71TK&psc=1​

 

[Das MotorRad]

Gs911 is great for resetting service reminders and more

https://www.hexgs911.com/

 

[vivekgr92]

Gs911 is great for resetting service reminders and more

https://www.hexgs911.com/

Yes I do have a GS911 tool. thank you!

 

[dravnx]

If you're going to pull plugs, get the coil pulling tool.
https://www.amazon.com/bmw-coil-removal-tool/s?k=bmw+coil+removal+tool
Oil filter wrench https://www.wunderlichamerica.com/Oil_Filter_Wrench_Steel_BMW_Motorcycles
Your 10-80 ft lb torque wrench won't do it. The pinch bolts for the front axle are 8 ft lbs. You also want to use a torque wrench in the middle 80% of it's range.
The proper hex drive socket for the front axle left and right side. A 1/2 drive breaker bar makes this easy.

 

[vivekgr92]

If you're going to pull plugs, get the coil pulling tool.
https://www.amazon.com/bmw-coil-removal-tool/s?k=bmw+coil+removal+tool
Oil filter wrench https://www.wunderlichamerica.com/Oil_Filter_Wrench_Steel_BMW_Motorcycles
Your 10-80 ft lb torque wrench won't do it. The pinch bolts for the front axle are 8 ft lbs. You also want to use a torque wrench in the middle 80% of it's range.
The proper hex drive socket for the front axle left and right side. A 1/2 drive breaker bar makes this easy.

Thank you this is very helpful, I added to the cart