• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

How To: service your craftsman vs-44808 ratchet

alright. thanks to this thread I re lubed my ratchets. i must admit after doing one its kinda addicting so i greased my torque wrench also. i have those powerbuilt ratchets and i couldn't take the stuff out but i just greased the hell out of it. my torque wrench didn't even have any grease on it.
 
Noid said:
For anyone who is having any problems with their "Craftsman" ratchets. keep in mind that it is a craftsman ratchet and it carries a lifetime warranty. so you can take it back and get a exchange at any Sears or Orchard Supply. But if your one of those people who carry a sentamental value with your tools. You can purchase all the internales (sp) new for your ratchet at sears for $0.01 yes one penny.
Click to expand...

Do you have to special order the insides of the ratchet, or do they carry them in stock? I went to OSH looking for the parts, and the tool people didn't know anything about replacement parts.
 
no replacement parts are sold. if for some magical reason you lost/misplace a part just put it back together and return it for a new 1. the old 1 will be rebuild and sears will resale it.
 
i just tried this on a Allen ratchet i thought id striped out from impacting it with a bmfh.. once inside it was indentical to the craftsmen and what was left of the grease was hard and gumed the gears to the point that they sliped on eachother..after an hour in the hot tank i used a mil grade gear grease and put it back togather.. it works better then it did new.

some great info on this thread.
 
i just did my "mac" 1's this evening and the few i have are just like the craftsman i started this thread about. makes me wonder who owns "mac". hmmmmmmmmmmm.
 
Always wondered why one of my Craftsman wrenches never seemed to ratchet. Now I've an incentive to go out and buy some grease. :laughing

Great thread, Shawn. :thumbup And thanks for resurrecting it.
 
The stores have rebuild kits in stock, but, generally they wont let you get your hands on them, however, you can exchange your ratchet for one with all new internals at the counter. I used to work for sears, the ratchets are rebuilt at the local stores. If I recall they're lubed with graphite not grease when they're reassembled there.
 
Mojo to someone who can post up, with pics, how to recalibrate an S&K torque wrench. :p
 
Bumping this with a big thank you to Shawn for taking the time to teach people how to do this! Have a set of them i'll do this to as soon as i have some free time :teeth
 
Hooli said:
Mojo to someone who can post up, with pics, how to recalibrate an S&K torque wrench. :p
Click to expand...

The expensive way...

The cheap way is to rig a 1 foot bar to the end of your torque wrench and hang a 1 pound weight from the end of of it. Hence, 1 lb-ft; that's what your wrench should read. If you need pictures of this, you need to take it to a pro... ;)
 
elskipador said:
i just did my "mac" 1's this evening and the few i have are just like the craftsman i started this thread about. makes me wonder who owns "mac". hmmmmmmmmmmm.
Click to expand...
unless your buying snap on theres alot of shit thats EXACTLY the same just with a different name....exaple, my coworker has a mac air wratchet that he paid like 150 for while another one has a harbor freight that he paid 18 for. they are exactly the same minus the name! personally i buy off the truck for the convenience and thats where they get us. its easier to spend $30 a week compared to hundreds all at once, plus my matco driver will take everything back for a full refund. and the mac driver comes ever 2 weeks, if that:laughing

unfortunately the snap on guy is an asshole so nobody goes on his truck anymore and hes only at the shop for like 20 mins.
 
true, but snap-on sells other peoples stuff with snap-on logos on it. central tool for one. my micrometer is made by central with a snap-on logo. god i paid a lot for that logo :cry
 
slowguy said:
just take it to sears and get it replaced with a new one, that is if it is giving you trouble. nothing beats a new one.
Click to expand...
elskipador said:
:hand oh and get another 1 that doesn't have any grease in it. this should be done 1st thing when you get them so they feel good. obviously you don't use yours enough to "need" this service.
Click to expand...
Noid said:
For anyone who is having any problems with their "Craftsman" ratchets. keep in mind that it is a craftsman ratchet and it carries a lifetime warranty. so you can take it back and get a exchange at any Sears or Orchard Supply. But if your one of those people who carry a sentamental value with your tools. You can purchase all the internales (sp) new for your ratchet at sears for $0.01 yes one penny.
Click to expand...

please note that sears has a policy of NOT handing you a new one. They 99% of the time give you a rebuilt/reman'd one. :thumbup
Also if there are signs of a cheater pipe being on your wrench, they can deny warranty work/replacement.
 
Last edited:
I just came across this post. MAn I'll tell you how much better my rachets are after grease'n them up! Iwould have never thought about doing this. Thanx Elskip. This is a good ass write up!!!!:thumbup
 
Yes, a great write up about something which is easily overlooked, I did that with mine a couple of years ago after I came across this thread for the first time.

Thank you for posting that elskipador
 
For fun, I'll snap a pic of the Craftsman rachet I have at work that has a grease fitting built into it.
They may still have a lifetime warranty, but there was a time they didn't expect you to ever need it. :)
 
You must log in or register to reply here.
Back
Top