• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

Show us your Cadillac!

After the first morning session we were divided into 4 groups. I was in Group 1 with three cars, the other groups were four cars each. Initially we were told 140 max, but after lunch our instructor said we're going to wick it up a bit since we were a pretty tight group.
Out of turn 7 down to the Bus Stop, 135-140's. Out of 12 down past S/F 155-160 and hard on the brakes for turn 1. Making the apex at probably 40 and with a little trail braking the back end will gently step out and your setup for 2.

For the infield section it was about 45-50ish. Ha, ha... the Big Boys, Joao Barbosa and Christian Fittipaldi, run the infield around 65-70 and 195-200ish coming out of 12 across the S/F. Smooth is FAST and they make it look soooo easy!

Joao and Christian signed my helmet. :teeth
38780792552_1fc6a9379a_z.jpg

.
38780791142_79f9023790_z.jpg
 
Way cool!!!

Jar full of Jelly.! :teeth
 
Daytona was definitely a Bucket List item!

Would love to have one of these too.
Here's a vid of Dave Leone, Cadillac's Chief Engineer giving a technical review of the Gen 3, CTS V.
[YOUTUBE]YlV97Esqwac[/YOUTUBE]
 
I know, I know, I've had more than a few sips of the kool-aid. :laughing

Here's the ATS V review. (Mine's a six speed manual. :teeth)
.
[YOUTUBE]pH7-iZTHyb4[/YOUTUBE]
 
Quite few 3rd Gen CTS-Vs at the half miles last month. Just like the Z06, there’s quite a bit of ways to add power to those things. There was one making I wanna say somewhere around 1200hp. And just like the Z06, since it’s only a less than 20 second pull, the whole overheat potential isn’t a problem.
 
Daytona was definitely a Bucket List item!

Would love to have one of these too.
Here's a vid of Dave Leone, Cadillac's Chief Engineer giving a technical review of the Gen 3, CTS V.
[YOUTUBE]YlV97Esqwac[/YOUTUBE]

During a Historics/Car Week here a few years back, when those were new, I saw one with a personal plate: CADZILA

:laughing
 
Last edited:
Daytona was definitely a Bucket List item!

Would love to have one of these too.
Here's a vid of Dave Leone, Cadillac's Chief Engineer giving a technical review of the Gen 3, CTS V.
[YOUTUBE]YlV97Esqwac[/YOUTUBE]

I know he’s a real engineer, but he may have had to do a deal with the devil to be the “chief” engineer. Why do I say this? At about 1:40 in, he says what I can’t possibly imagine any true car engineer would say and says wet sump is better than dry sump. For a grocery getter, sure go ahead and stay wet, because yes he’s right the dry sump setup costs more, weighs more, and takes up more room. But for a performance car? Yes it costs more, weighs more, and takes up more room. But the performance gains you get and driving dynamics improvements from moving the center of gravity lower with the dry sump are absolutely worth it.

Cliff notes: They didn’t have the packaging room to implement the dry sump in that platform like that engine has in the Corvette. The same reason why the CTS platform (GM Alpha) mate, the Camaro also didn’t get the dry sump. So he threw out some bullshit as to why they “wanted” wet sump over dry.
 
Quite few 3rd Gen CTS-Vs at the half miles last month. Just like the Z06, there’s quite a bit of ways to add power to those things. There was one making I wanna say somewhere around 1200hp. And just like the Z06, since it’s only a less than 20 second pull, the whole overheat potential isn’t a problem.

Yes - I don't really know much about hot-rodding newer cars, but it seems that that an ECU reprogram, maybe some different injectors and FI plenum or whatever it's called, and some suspension & tires could get it up there. Then maybe a cam? Or are folks just running nitrous?
 
Yes - I don't really know much about hot-rodding newer cars, but it seems that that an ECU reprogram, maybe some different injectors and FI plenum or whatever it's called, and some suspension & tires could get it up there. Then maybe a cam? Or are folks just running nitrous?

You’re on the right track. But nitrous doesn’t see much use in this space. The easy stuff is the bolt on modifications. Exhaust, intake, and specifically in the case of a supercharged engine like the CTS-V, you can do the pulley(s) and overdrive the blower. Maybe put on a bigger throttle body and have the stock blower ported. Then a reflashed PCM (a tune) with all that would get the CTS-V to 750-800hp which is not bad at all for a fairly small investment. Going deeper would be to replace the stock supercharger with a much bigger one. Then injectors (with possibly running a tune to use E85 fuel) and a different camshaft. And that would be enough to crack 1000hp.
 
Dry sump vs wet? Yeah, I was a little puzzled by that. I'm thinking it's a real estate and $$ issue.

Now did someone mention Horsepower...
From a stock 640HP in the Gen 3 cars to 700 - 800HP range this seems to be what's typically involved.
HPE850 Upgrade Includes:

• Lower Pulley Upgrade
• High-Flow Cylinder Heads
• Camshaft upgrade
• Upgraded Valve Springs, Intake & Exhaust Valves
• Upgraded Heat Exchanger
• TCM Software Upgrade
• Upgraded Lifters & Push Rods
• High-Flow Air Induction System
• Long-Tube Stainless Steel Headers
• High-Flow Catalytic Converters
• All Necessary Gaskets & Fluids
• Engine Management Calibration / Dyno Tuning

Not an endorsement for Hennessey, just a fun cid of the CTS-V launches
.
 
Last edited:
This thread is making me want to use my 401K for a Gen 3 CTS-V and live in a trailer park instead of saving for a house!

��
 
This thread is making me want to use my 401K for a Gen 3 CTS-V and live in a trailer park instead of saving for a house!

��

The one you really want is the very very rare CT6-V. Yeah it won’t have the loud and wild exhaust note of the CTS-V, but the CT6 has every single bell and whistle that GM has to offer. Including the SuperCruise system and an absurd ~30 speaker Bose Panaray audio system.
 
The one you really want is the very very rare CT6-V. Yeah it won’t have the loud and wild exhaust note of the CTS-V, but the CT6 has every single bell and whistle that GM has to offer. Including the SuperCruise system and an absurd ~30 speaker Bose Panaray audio system.

I would be the ruler of the trailer park!! LOL!

BTW - this Bentley caught my eye yesterday:

https://bit.ly/37x8B7q

[YOUTUBE]QhE64beLG0Q[/YOUTUBE]
 
The one you really want is the very very rare CT6-V. Yeah it won’t have the loud and wild exhaust note of the CTS-V, but the CT6 has every single bell and whistle that GM has to offer. Including the SuperCruise system and an absurd ~30 speaker Bose Panaray audio system.

How many of those did they make... a few hundred? Once again, GM nails something, and then kills it. Only thing I didn't like about the CT6 is its size; pretty damn huge.
 
How many of those did they make... a few hundred? Once again, GM nails something, and then kills it. Only thing I didn't like about the CT6 is its size; pretty damn huge.

Just think of it as an AWD, 4 seater Corvette! :teeth

Cadillac CT6 with 4.2L TT V8 Blackwing Engine Production Summary
Model Year 2019 2020
USA . . . . . 825 575
Canada . . . . 50 25
Total . . . . . 875 600

Roughly 1,475 units of Cadillac CT6 models with the twin-turbo 4.2L V8 DOHC engine, otherwise know as Blackwing, were produced by the time the Cadillac CT6 lineup (including the CT6-V) was discontinued at the end of January 2020. Those 1,475 units span both the 2019 and 2020 model years and include the CT6 Platinum, 500HP - 574 Torque Lb/Ft, Blackwing engine.

The CT6-V, had the high-output version of the engine is 550HP, 640 Torque Lb/Ft.

Unfortunately, I don't know the split between the Platinum vs V models, but my guess would be that more Platinum were produced.

Base prices were about:
Platinum - $98K
V - $97K
Back at the beginning of 2020 most of the V prices were in the $101K to $106K range.
 
^^^ Hey Bill, Happy New Year!

FYI...
Cadillac placed 1st, 3rd, 6th, and 7th (Daytona Prototype International class) in the Motul 100 minute qualifying race on yesterday for next weekend's Rolex 24 Hours at Daytona. :party

1 31 F. Nasr / P. Derani Whelen Engineering Racing Cadillac DPi 51 1:41:06.688 33 1:36.861 132.313

2 55 O. Jarvis / H. Tincknell Mazda Motorsports Mazda DPi 51 1:41:10.352 +3.664 +3.664 48 1:37.059 132.043

3 5 T. Vautier / L. Duval Mustang Sampling / JDC-Miller MotorSports Cadillac DPi 51 1:41:11.315 +4.627 +0.963 35 1:36.888 132.276

4 60 D. Cameron / O. Pla Meyer Shank Racing w/Curb-Agajanian Acura DPi 51 1:41:13.683 +6.995 +2.368 38 1:36.968 132.167

5 10 R. Taylor / F. Albuquerque Konica Minolta Acura ARX-05 Acura DPi 51 1:41:15.685 +8.997 +2.002 40 1:36.690 132.547

6 48 J. Johnson / K. Kobayashi Ally Cadillac Racing Cadillac DPi 51 1:41:26.673 +19.985 +10.988 35 1:36.298 133.087

7 01 R. van der Zande Cadillac Chip Ganassi Racing +1'14.834 1:36.570
K. Magnussen Cadillac DPi 51 1:42:21.522 +54.849 45 132.712

.
 

Attachments

  • Whelen Cadillac DPi.jpg
    Whelen Cadillac DPi.jpg
    54.3 KB · Views: 192
Cadillac Racing…

In 2017 Cadillac got back into long distance racing in the Daytona Prototype International Class (DPi) with their DPi-VR cars. The DPi Class is a “Spec” class, meaning there are specifications for body work, engine configurations, chassis, etc. The Cadillac V8 engines are naturally aspirated with sonic air restrictors, while the other teams with I4 or V6 engines run turbos. There are subtle differences on the engine air intakes on the roof of the different cars.

The Caddy V8 engine uses a cylinder block, head castings, and head gaskets with Cadillac part numbers. The engine originally measured in at 6.2-liters (376 cu. in.) of displacement, which is the same size of engine that the third-generation Cadillac CTS-V and Cadillac Escalade use. Cadillac reduced the engine size to 5.5-liters for the 2018 IMSA season in search of more drivability. It no longer shares an engine displacement with any Cadillac road vehicles.

Current engines are 5.5L / 336CI, 580HP@7050RPM

The Rolex 24 Hours of Daytona is this weekend (Jan 30 -31) and Cadillac is going for their 5th straight win!

2017 results, 659 laps on the 3.56 miles road course for 2346 miles
1 - #10, Konica Minolta Team
2 - #5, Mustang Sampling Team
6 - #31, Whelen Engineering Team

2018 results, 808 laps and covered 2,876 miles
1 - #5, Mustang Sampling Team
2 - #31, Whelen Engineering Team

2019 results, 593 laps, 2111 miles
1 - #10, Konica Minolta Team
2 - #31, Whelen Engineering Team
5 - #85, JDC Miller Team
9 - #5, Mustang Sampling Team

2020 results, 822 laps, 2926 miles
1 - #10, Konica Minolta Team
3 - #5, Mustang Sampling Team
5 - #85, JDC Miller Team
7 - #31, Whelen Engineering Team
 
I assume parts are broadcasted. I will check out the schedule tonight.

Love my racing.
 
IMSA.tv usually has live in car cameras during the race. Its fun to watch them during the night.
 
Three of my favorite Cadillacs. :)
Original painting by Bill Patterson at the 2019 LBGP - Cadillac Hospitality Event.
(Acrylic on canvas, 58"x40")

Black car - #5, Mustang Sampling
Yellow car - #85, JDC Miller
Red car - #31, Whelen Engineering
.
50888963251_03f46ea224_b.jpg
 
Last edited:
A lot of coverage!!

Looking forward to some quality alone time.
 
Back
Top