Need 46mm socket

[UDRider]

Hi

Anyone know where one can buy 46mm socket in South Bay?
I tried Lowe's, couple auto shops (auto zone, and one other)


Thanks

 

[Hooli]

Harbor Freight?

 

[UDRider]

Harbor Freight?

Hmm, haven't tried that will stop by tonight.

 

[UDRider]

Nope they don't have it. :-(

 

[aram]

You might try sears. Usually sockets that big are with the axle nut sockets in auto parts stores. Looks like most auto parts stores have that as a special order item though.

You can always get it online:

http://www.amazon.com/gp/product/B0..._m=ATVPDKIKX0DER&pf_rd_r=15XCSDFNEXFT7WEME3R8

also if you do get one, you will likely need a 3/4" to 1/2" adapter

http://www.amazon.com/TEKTON-47822-...469_img_2?ie=UTF8&refRID=0Q1S58ZV8XR3BFARVEX9

 

[anytwowilldo]

I have a 1 13/16" 12 point socket in 3/4" drive I'll lend you. It would take a couple of days but I could ship it to a Mike's Bikes in the South Bay.

 

[PunkRockMonkey]

Also give Orchard Supply Hardware (OSH) a ring. I know they carry some pretty oddball stuff there.

 

[FillmoSlim]

Try/call Sears, they'll likely have an Impact Socket in that size.

 

[UDRider]

I have a 1 13/16" 12 point socket in 3/4" drive I'll lend you. It would take a couple of days but I could ship it to a Mike's Bikes in the South Bay.

Thank you for the offer. I was hoping to find it locally so I can work on my bike tomorrow. I guess I'll just order from Amazon prime.

Also give Orchard Supply Hardware (OSH) a ring. I know they carry some pretty oddball stuff there.

Nope. :-(

 

[russ69]

Try/call Sears, they'll likely have an Impact Socket in that size.

Yes, look at the impact sockets. Cheap and often come in big sizes. Just checked my tool box, I got one, it's a big boy.

 

[Lucky13xx]

I have a 1 13/16" 12 point socket in 3/4" drive I'll lend you. It would take a couple of days but I could ship it to a Mike's Bikes in the South Bay.

I've tried to find one in a pinch before. Had to go the 1 13/16" route also. Lowes has them on the shelf. For 3/4 drive

 

[UDRider]

Try/call Sears, they'll likely have an Impact Socket in that size.

Nope. Biggest is 36mm
It's really is a odd size socket. Heh, should have ordered in advance, just didn't think I would need to get wheel off to install the part.

 

[UDRider]

I've tried to find one in a pinch before. Had to go the 1 13/16" route also. Lowes has them on the shelf. For 3/4 drive

Hmm, there is not a lot of wiggle?

 

[hophead]

I've got a 46mm with half inch (1/2") drive (socket) you may borrow.

 

[vizcarmb]

you got napa, winchester auto, allied auto parts, car quest, ace. your so commercial brah. support your local business

 

[UDRider]

I've got a 46mm with half inch (1/2") drive (socket) you may borrow.

PM sent.

you got napa, winchester auto, allied auto parts, and car quest. your so commercial brah. support your local business

I have been driving around for better part of afternoon trying to support locally...

 

[Lucky13xx]

Hmm, there is not a lot of wiggle?

Not bad. I use it for my speedtriple rear axle nut. Some pretty anodizing to worry about?

I'm in the Cupertino/Sunnyvale area if you need it.

Also Nu tools on El Camino has them on hand (did when I last checked) Waaaaaay overpriced though.

 

[Charles R]

If you haven't found a solution... Monday you can try calling Bugformance of San Jose. 46mm is the size of vw bus rear axle nuts, and iirc they have a tool in stock for those. (Vw bugs are 36mm)

I also have that socket, and you can borrow it... But I won't have access to my toolbox until Tuesday.

 

[stan23]

I have a 1 13/16" 12 point socket in 3/4" drive I'll lend you. It would take a couple of days but I could ship it to a Mike's Bikes in the South Bay.

this is what I have and use for my ducati as well.

 

[TwoBit]

Not bad. I use it for my speedtriple rear axle nut. Some pretty anodizing to worry about?

I'm in the Cupertino/Sunnyvale area if you need it.

Also Nu tools on El Camino has them on hand (did when I last checked) Waaaaaay overpriced though.

Yup "Nu tools" should have them.