• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

Police Motorcycle Training

motorman4life,

You suggested to a civilian rider they should focus on 18 by 36 foot figure 8s and when that exercise was perfected you'd advise what to do next.

I started riding in June 08. Since then I've managed about 260 hours. At least half of that in a parking lot and much of that doing 18 by 36 foot figure 8's. I do Uturns, quarter turns and serpentines but I keep coming back to the figure 8 because it seems like the most productive maneuver I've got.

I'd be grateful if you'd take a look at my figure 8, which is well practiced but not perfected, and tell me what I might do next. http://www.youtube.com/watch?v=Z5b3-Gk0kQE

I don't use clutch or brake in figure 8s. If I should be using them I need to understand why. In this particular video I was going more for speed and not so much for precision. I'm more accurate at a slower speed. The bike is 300cc and 240 pounds. I don't plan on ever going bigger.

Thanks in advance for any assistance.
 
I'm not a LEO, beginner, but you demonstrate good throttle control.

One thing you could work on is looking through your turn. Your head should not be looking in front of you. Instead your head should be at an angle to your chest, in the direction that you're heading toward, so that your eyes can see where you're going next. This technique will help you when you're riding in dirt.
 
Don't forget about us... http://www.srdtf.com/

Go to class scheduling and scroll down,, there's a nice video in there of our school. I just spent the last two weeks out there instructing,, a great time as always.

MM4L; That is the first I have heard about Brinkerhof,, too bad that guy is a MC legend...

Beginner: A few things I see that could use improvement. Your head turns are waaaay late. As you transition thru the fig 8,, your head should already be around looking back toward the center. Slow down through the transition. Counterbalance the bike. Are the bars locked fully to the frame during your turn,, if not lock them out and hold them tight against the frame, this will tighten up your turn tremendously.

Practice making a circle at the same location you are training. As you are doing this, turn your head to the inside of your turn and try to find your tail light. If you can see your tail light,, that is a good head turn. Don't look down at it though, find it our of your peripheral while maintaining a high visual horizon. Work on that for a bit and I'll give you some tips on the transition.

I'm not trying to be harsh here, to the contrary, I hope you stay motivated and continue to improve your skills. He11, your ahead of most by just going out and trying,, good job !

Oh almost forgot,, Silvr: yer GF is hawt!!
 
Last edited:
As I understand it,, that may change...
 
Oh, that would be so sweet! :banana

Still I wonder if the Sacto dudes would not like my arriving 2 hours late. Raleigh at ASCO didn't mind at all. :laughing

P.S. Hey, Brian!
 
Don't forget about us... http://www.srdtf.com/
Oh almost forgot,, Silvr: yer GF is hawt!!

Hey Brian,

She says thanks!

I just got back from San Bernardino where I got my instructor certificate.

I'd like to come up and hang out a few days for one of your schools to see if there is anything to steal.

All else is good. Hope the same for you and your crew.
 
Sounds good John. I would like to hear what the guys down south are teaching as well.
 
Hey Brian,

She says thanks!

I just got back from San Bernardino where I got my instructor certificate.

I'd like to come up and hang out a few days for one of your schools to see if there is anything to steal.

All else is good. Hope the same for you and your crew.

So when is LPD going to give a civilian class?? :teeth:ride:thumbup
 
Beginner: Your head turns are waaaay late. As you transition thru the fig 8,, your head should already be around looking back toward the center. Slow down through the transition. Counterbalance the bike. Are the bars locked fully to the frame during your turn,, if not lock them out and hold them tight against the frame, this will tighten up your turn tremendously.

Practice making a circle at the same location you are training. As you are doing this, turn your head to the inside of your turn and try to find your tail light. If you can see your tail light,, that is a good head turn. Don't look down at it though, find it our of your peripheral while maintaining a high visual horizon. Work on that for a bit and I'll give you some tips on the transition.

Mary, The backwards looking you mention is something I do when I'm practicing the same maneuver, or Uturns, in an actual road, because cars do come along (the rural roads where I am can get very quiet). I see that as learning to be less reliant on visual references for maneuvering the bike. Looking over my shoulder does not make my turns more accurate but it's a useful skill to have.

I don't think I slow down in the middle of the figure 8. Not sure why that would matter. It would be impossible to do that size figure 8 at that speed without counter balancing, it should be noticable in the video.

The figure 8 size allows some speed and keeps a good steering challenge. I can make them smaller by going to first gear and slowing down but that's a different exercise.

Do you know of a youtube video of someone doing a full lock, lock-to-lock figure 8? Do you even know somebody who can do that? It would be inspiring to see.
 
Do you know of a youtube video of someone doing a full lock, lock-to-lock figure 8? Do you even know somebody who can do that? It would be inspiring to see.

beginner:
http://www.youtube.com/watch?v=6P8NgWlcMVA
http://www.youtube.com/watch?v=PCgWHykfB6k&feature=related
http://www.youtube.com/watch?v=GTsFkoBWwPQ&feature=related

And then make sure you check out the real pros (Police Motors) during their skills/competition meet. There are many to view on YouTube.

Break

Hi Brian,

Thanks again for lending me your ear a few weeks ago up at A&S motors, while you were getting a tire put on. Hope you made it home before the rain and kicked butt up at Redding!!!:party

Patrick
:teeth
 
beginner:And then make sure you check out the real pros (Police Motors) during their skills/competition meet. There are many to view on YouTube.

Thanks for the demonstration. I posted a question on your video before I realized you posted the videos here. I'll ask again, how much riding and practice did you need before those locked turns were possible? I try that occaisionally and my balance skills are not there yet.

I admire the Asian gymkhana riders. They have the advantage of smaller bikes but I also ride a small one (KLX300r).
 
Patrick,,

Good to hear from you again. Redding was an absolute blast. RPD holds a great event. Our Unit (SSD) did very well.

Beginner: I hope my tone does not sound too harsh,, again I'm not trying to be overly critical, just helpful. All of your training (in the tight "patterns") should be done in 1st gear,, as slow as you can possibly go. The slower/tighter you can complete a turn,, the more control you have over the bike. If you can do it at 2 mph,, 7mph is a breeze. All of our students are required to be extremely proficient at doing lock to lock turns. Most (if not all) of the Police MC patterns require this skill. Getting your eyes waaay ahead of you is paramount in developing this skill.

Take a look at my avatar <---. That is me in Oakland last year. My eyes are out in front of me and had been so prior to that turn. My body is actually unwinding around my head. The turn I am in currently was initiated a looong time ago when I first visually picked up the cone way before I got there. As I rotate around that cone my head will start turning right as I approach the next cone.
 
Last edited:
Beginner: All of your training (in the tight "patterns") should be done in 1st gear,, as slow as you can possibly go. The slower/tighter you can complete a turn,, the more control you have over the bike. If you can do it at 2 mph,, 7mph is a breeze. All of our students are required to be extremely proficient at doing lock to lock turns. Most (if not all) of the Police MC patterns require this skill. Getting your eyes waaay ahead of you is paramount in developing this skill.

Take a look at my avatar <---. That is me in Oakland last year. My eyes are out in front of me and had been so prior to that turn. My body is actually unwinding around my head. The turn I am in currently was initiated a looong time ago when I first visually picked up the cone way before I got there. As I rotate around that cone my head will start turning right as I approach the next cone.

Thanks 5MARY4, I can keep a fairly straight line at 1.5 mph and slower but the minimum speed I can do tight turns, including figure 8s, so far, is about 4 mph in first gear. (I have to use a gps for speed. It is good for straight lines but not reliable for turning exercises.)

I started on the bike 5 months ago. I ride 2 hours a day, about 280 hours so far, more than half of that in a parking lot. There are noticable changes in balancing and handling ability at about 2 week intervals but I assume the learning curve is years, not weeks or months.

I'll spend some more time on 1st gear turns and see if I can get them below 4 mph. Can you suggest a remedial exercise for developing locked turns? (If I had to guess I'd say stovepipe is doing his lock-to-lock figure 8s in second gear at something over 4 mph.)

Thanks again.
 
Thanks 5MARY4, I can keep a fairly straight line at 1.5 mph and slower but the minimum speed I can do tight turns, including figure 8s, so far, is about 4 mph in first gear. (I have to use a gps for speed. It is good for straight lines but not reliable for turning exercises.)

I started on the bike 5 months ago. I ride 2 hours a day, about 280 hours so far, more than half of that in a parking lot. There are noticable changes in balancing and handling ability at about 2 week intervals but I assume the learning curve is years, not weeks or months.

I'll spend some more time on 1st gear turns and see if I can get them below 4 mph. Can you suggest a remedial exercise for developing locked turns? (If I had to guess I'd say stovepipe is doing his lock-to-lock figure 8s in second gear at something over 4 mph.)

Thanks again.

From what it looked like to me,, Stovepipe is in 1st gear.

For your full locked turns: First, no brakes. You don't need them and they are only going to hinder your progress. Our school is a "no brake school". Trailbraking will result in dismissal. There is a time and place for trail braking. But not during training. Use your clutch to control your MC. Slightly elevate your RPMs and use the "grey area" of the clutch to maintain control. While in the short cones, my clutch is NEVER fully in or out. It is always somewhere in between. If you are trying to slow down in the patterns, use just enough clutch to keep the MC upright. Any more than that just adds speed. Lastly (for now) get that head around. While still in the left hand portion of your turn (just after apex) start turning your head to the right. As you reach the transition portion, your head should be seeing the tail light (peripherally) with your chin resting on your right shoulder. Think bike going left,, eyes turned way right. Now turn the bars smooth and quick. Be careful
 
no brakes... Use your clutch to control your MC... Lastly (for now) get that head around...Be careful

Thanks again, I've never used brakes in turning exercises. The only exception is a 2' offset cone weave when the MC is going down a slope in the parking lot--a few taps to keep the speed down.

I can't yet do tight circles or figure 8s below 4 mph because of balance issues, regardless of how I use the clutch. I'll work on that more and see how it goes.

Eyes are important in a lot of sports. I know that and work on it.

I'm careful but I assumed there would be falls and there have been, 8 so far, every one a precious gift of knowledge. Only one of them was on pavement, in my practice parking lot, when the front wheel slid out on a cup of silica beads spread over a couple square feet. They were put there by a road painting truck that stopped for lunch and forgot to turn off the feeder that adds the beads to the paint. I'll take responsibility because I noticed the white-ish spot and could have hand checked it before starting practice. (If you notice a road painting truck parked for lunch I'd suggest you check to see if the bead feeder is turned off and if they dumped any of that stuff in an unsafe manner write them a ticket--please.)
 
So when is LPD going to give a civilian class?? :teeth:ride:thumbup

Motorcycle safety is a big issue nationally and at the state level.

LPD is leading the charge in trying to bring safety awareness to the community.

Some type of civilian riding/training/assessment course is in the works. We are not sure how we are going to pull it off but it is a hot topic of conversation for us right now.

BARF and 1Rider will be at Granada High School on Thursday 11/13 for a lunch time M/C safety awareness demonstration.
 
Patrick,,

Good to hear from you again. Redding was an absolute blast. RPD holds a great event. Our Unit (SSD) did very well.

Beginner: I hope my tone does not sound too harsh,, again I'm not trying to be overly critical, just helpful. All of your training (in the tight "patterns") should be done in 1st gear,, as slow as you can possibly go. The slower/tighter you can complete a turn,, the more control you have over the bike. If you can do it at 2 mph,, 7mph is a breeze. All of our students are required to be extremely proficient at doing lock to lock turns. Most (if not all) of the Police MC patterns require this skill. Getting your eyes waaay ahead of you is paramount in developing this skill.

Take a look at my avatar <---. That is me in Oakland last year. My eyes are out in front of me and had been so prior to that turn. My body is actually unwinding around my head. The turn I am in currently was initiated a looong time ago when I first visually picked up the cone way before I got there. As I rotate around that cone my head will start turning right as I approach the next cone.

Yeah, but can you do it on a real man's bike? 875 lbs of Harley!!!
 
For your full locked turns:

I focused on full lock circles for the past 2 days in the parking lot. Without some tips or tricks I won't be doing them in the forseeable future. I can circle the bike easily with the steering bar a fraction of an inch from the stops but the minute I leave the steering against the stop the bike leans inward and I have to catch the bike with a foot. It feels like I should be able to keep everything in balance with upper body weight but my balancing aptitude is not there yet.

I have to doubt my observation that stovepipe is in second gear because I have to be in first gear to attempt locked circles. I wonder if stovepipe is using the rear brake in his locked circles.
 
I have to doubt my observation that stovepipe is in second gear because I have to be in first gear to attempt locked circles. I wonder if stovepipe is using the rear brake in his locked circles.


Well I use to feather my rear brake (sometimes).:laughing
Those vids were made before I became enlightened. I have since winged myself off of the “trail braking” technique. Thanks to a conversation I had with 5Mary4 where he gave me some guidance on how to do this. It's actually easier to manipulate your clutch than constantly feathering your rear brake. Trail-Braking for there situations seems now to be counter intuitive. Knowing where your friction zone is IMO the best way to maintain control.
However, I know there are still some motor instructors who teach the trail-braking method. It’s all subjective.

btw
I think it’s easier to do those slow speed maneuvers/transitions on a harley then say a bike like mine. Only because the cg is different and your kind of sitting behind your knees.
I know this because I was showing a friend of mine who has an hd road king. Not sure what year it is but its burgundy. I could do the eliminator on his bike no problemo.
He didn’t think I could do it. When I got back on my bike, it was like I never rode before. Couldn’t believe the difference. :wow

Beginner,

Keep practicing, you'll get there.
 
Well I use to feather my rear brake (sometimes).:laughing
Those vids were made before I became enlightened. I have since winged myself off of the “trail braking” technique. Thanks to a conversation I had with 5Mary4 where he gave me some guidance on how to do this.

I think it’s easier to do those slow speed maneuvers/transitions on a harley then say a bike like mine. Only because the cg is different and your kind of sitting behind your knees.

Keep practicing, you'll get there.

Thanks stovepipe, My pattern seems to be 2 hours of riding a day with half of that doing exercises. (When I realized riding is addictive I decided to be addicted to skill instead of miles. I think this can be true for any rider who does enough practice to see progress.) As mentioned before, there's no way I'll be doing your full lock figure 8s, with or without brakes, anytime soon, unless there is a remedial exercise to build towards it I haven't discovered.

I ride a 234 pound, 300cc bike but it has a tall seat, 36.5 inches. Never-the-less, when I put my beginner backside on the seat for the first time it seemed to weigh 10,000 pounds and have the power of 4 diesel locomotives. I stopped making scary-throttle-mistakes months ago and sometimes the bike seems light as a feather now.

How long did you have to ride--months, years, whatever--before your balancing abilities were good enough to learn full lock circles?

Thanks again.
 
Thanks stovepipe, My pattern seems to be 2 hours of riding a day with half of that doing exercises. (When I realized riding is addictive I decided to be addicted to skill instead of miles. I think this can be true for any rider who does enough practice to see progress.) As mentioned before, there's no way I'll be doing your full lock figure 8s, with or without brakes, anytime soon, unless there is a remedial exercise to build towards it I haven't discovered.

I ride a 234 pound, 300cc bike but it has a tall seat, 36.5 inches. Never-the-less, when I put my beginner backside on the seat for the first time it seemed to weigh 10,000 pounds and have the power of 4 diesel locomotives. I stopped making scary-throttle-mistakes months ago and sometimes the bike seems light as a feather now.

How long did you have to ride--months, years, whatever--before your balancing abilities were good enough to learn full lock circles?

Thanks again.

Usually a bike going into the ground is one of two things (or a combination). Eyes went down or the clutch went in (or some of both). Try doing your turns with less MC lean angle (maintain full lock tho). Keep your eyes up and find the tail light. Maintain just enough engine RPM to keep the MC from stalling,, about 2k or so. To get the bike to lean over a little more,, pull away a "little" power by pulling in the clutch a little. All of the clutch manipulation is done in fractions of an inch. These are VERY minor inputs. Counterbalance your body in relation to the amount of lean angle you induce into the MC.

For reference only,, our motor school is two weeks long, week 1 is all short cone work, about 50 hours or so. Week 2 is primarily long day rides. Prior to motor school, we provide one to two weeks of "pre-training" in short cone work. After motor school, a new rider spends two weeks (minimum) with a CMTO on the road. So in the course of the first three weeks, a new motor spends about 120-150 hrs on the bike,, riding constantly,, under close supervision and constant instructor input. By midweek of week 1 of motor school,, our goal is to have the student riding the patterns side saddle,, or with an intructor as a passenger,, or over 2x4's,, with cones on their head,, or while throwing things at the bike,, or a combo of some of these things. Our people should leave our facility with COMPLETE control of the MC. A foot down or a bike down after Wed of week 1 is cause for dismissal from motor school.

Silvr: OH REALLY ?????
 
I think it’s easier to do those slow speed maneuvers/transitions on a harley then say a bike like mine.

Its all about practicing and having good technique.

I ride a Road King, but have had the opportunity to ride the BMW 1200 and 1150 as well as the Honda ST1300 in the cone patterns. I also ride my FJR1300 in the patterns. All of them are easy to ride as long as you have good head and eyes and smooth clutch throttle.

Personally I think the BMW is easier to ride fast in the patterns and more fun to flick through the turns. You just have to be comfortable and confident in letting the bike "fall" into the turns and knowing that keeping the power on will keep the bike upright while carving a tight turn. Check out some of 5Mary4's pictures from a variety of the motor competition threads and you will see the bike at some extreme lean angles.

Check out the lean angle in the third pattern of this video............... schweet!!! http://www.youtube.com/watch?v=1i9aL4AwzUM&feature=channel
 
Back
Top