• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

Innovv C3 motorcycle dashcam group buy

Junkie said:
What all do I need in order to install it? I'd put it on a switched power source (taillight etc). Do I need an adapter from 12v to USB that drops the voltage down to 5v? Are these set up so that, once wired in, I don't need to pay attention for it to work?
Click to expand...

The review from Techmoan for your reference, :):):)

One thing that I didn't mention during the review was how this could be considered to be the first Motorcycle 'Dash' Camera. Over the years I've reviewed plenty of Car DVR Dashcams, but whenever people asked me if something similar was available for motorcycles I've always drawn a blank....until now. The C3 has all the necesssary features to make a great bike DVR . It has the ability to loop over the oldest video on the memory card, the water resistant camera can be lashed to the frame or hidden away in a fairing and the control unit can be stowed seperately in a dry area of the bike - perhaps under the seat, powered from a switched 5V USB.

http://www.techmoan.com/blog/2014/11/2/innovv-c3-review-the-wired-lens-mini-camera.html
 
Junkie

The power cable I listed in previous post does just that. Just tap into a switched circuit on you bike and you are done. Every time you turn the bike on the camera turn on, When you turn the bike off the camera turns off. And in loop mode you are always recording, Very convenient.....
 
danate said:
Rock, any chance you can make this available on your website?
Click to expand...

Before put it on website, We need to be sure the quality is reliable. :):):)

I learned from your posts, the information you supplied is very useful,
http://www.canyonchasers.net/shop/generic/relay.php

I am thinking is there anything else need to upload to website for the easy installation? for example, the lens clip?:rolleyes:rolleyes:rolleyes
 
The installation poto

From rider, the lens is installed under head light. :):):)
 

Attachments

  • vfr1200_16x9crop.jpg
    vfr1200_16x9crop.jpg
    77.9 KB · Views: 17
The New FM and GUI released on 2015 03 03

Click below link and move to the bottom of the page, find the downloadable files source,
http://www.innovv.com/#!the-c3/ckmf

Click the file, C3 FW &GUI _20150303 to download.

The last updated the FW and GUI included.

Updating process,
Unzip the file, you can see two files,
1. FWC3.bin
2. C3-GUI Configuration Utility

If you do not need change anything, connect the camera to computer and put FWC3.bin to the root of SD card, and power on camera, the red LED blink till off.

If you want to have custom settings, like your logo on video, the video length or others,
a) connect the camera to computer and put FWC3.bin to the root of SD card, and
b) open C3-GUI Configuration Utility and make setting per your preference, and save it to camera.

Power on camera, you can see first Red LED blink, then Green LED blink till LED off, both FW and GUI updating finished.

Please be sure, the lens should plug into recording unit.
If lens installed on bike, you can take the SD card from recording unit and insert it to computer, save the FW and GUI files to the root of SD card, insert the SD card into camera again, power it on, it will update accordingly till LED off.

The process is simple and easy. :cool:cool:cool
 
Checking the GUI and firmware upgraded on C3

For easy operation, the GUI file and Firmware file both auto-deleted after successful upgraded, that create a problem, that people could not find what the last setting on camera and which version of FW installed. :p

Thanks for Bob, he designed the GUI tool to sort the above issue.
Click below link to download it.
http://2kool4u.com/minicams/Ez_Configuration_C1.shtml

His GUI allow you to make settings and easy to track.
 

Attachments

  • FW update recording.JPG
    FW update recording.JPG
    77.7 KB · Views: 10
  • FW update recording-1.JPG
    FW update recording-1.JPG
    62.4 KB · Views: 13
Plastic holder

Hi Rock,

Here is a picture of the camera mounted on my 06 GSXR600. Can I order the plastic holder for the recording unit shown (blurry) in the other picture?

Thanks,
 

Attachments

  • IMG_3725.jpg
    IMG_3725.jpg
    46.4 KB · Views: 12
  • IMG_3728.jpg
    IMG_3728.jpg
    40.8 KB · Views: 9
bigdog25 said:
Hi Rock,

Here is a picture of the camera mounted on my 06 GSXR600. Can I order the plastic holder for the recording unit shown (blurry) in the other picture?

Thanks,
Click to expand...

I have some extra new holder's, $8 that's what they cost me, if you want one. I'm up in Richmond
 
bigdog25 said:
Hi Rock,

Here is a picture of the camera mounted on my 06 GSXR600. Can I order the plastic holder for the recording unit shown (blurry) in the other picture?

Thanks,
Click to expand...

You can get it from Guzzi510, it would be faster.

He is very experienced and skilled in the C3, working on C3 since the development, testing and did great support to riders who say he is "DA MAN"!:cool:cool:cool

Click below link to review the blog about him and the C3.
Willy 510 and INNOVV C3
 
Is there going to be another group buy anytime soon?
 
jmg893 said:
Is there going to be another group buy anytime soon?
Click to expand...

Working on a new group buy that would be a plug and play setup for wiring it up to your bike. Will probably include a 12v to 5v transformer with Posi connectors and a OTG cable for viewing on the go.
Pricing and more details are being worked on right now.
More info soon:thumbup
 
IAmA M0t0r Ridεr;8953624 said:
WHere's my extra free holder? I think I was promised that, posted, and nothing. I am patient, but...
Click to expand...

Did you send Rock your mailing address? I got mine already?
 
Guzzi510 said:
Working on a new group buy that would be a plug and play setup for wiring it up to your bike. Will probably include a 12v to 5v transformer with Posi connectors and a OTG cable for viewing on the go.
Pricing and more details are being worked on right now.
More info soon:thumbup
Click to expand...

Looking forward to it. Thanks,
 
Guzzi510 said:
Working on a new group buy that would be a plug and play setup for wiring it up to your bike. Will probably include a 12v to 5v transformer with Posi connectors and a OTG cable for viewing on the go.
Pricing and more details are being worked on right now.
More info soon:thumbup
Click to expand...

Relephant to my interests. :thumbup
 
Willy, I'm in for one on the next batch (if there is one).
 
You must log in or register to reply here.
Back
Top